WebMIS - Rexroth's web-based analysis tool for higher productivity
your productivity with WebMIS from Rexroth - a comprehensive tool for the recording,
visual presentation and optimization of operational and production data.
This web-based analysis tool includes a multitude of pre-configured analysis
graphics and tables for the analysis of weaknesses and machine optimization.
With the aid of the joint recording of machine signals, stoppage causes and
fault messages, machine or plant failures can be identified any time. In the
process, it is made immediately clear whether the fault is a technical one or
an organizational one, thus permitting the rapid localization and remedy of
interference and bottlenecks. The recorded data can be presented either on a
machine-specific basis or in comparison with several machines. Thanks to the
production of machine indices such as OEE (Overall Equipment Effectiveness),
for example, or utilization ratio and availability, the entire production network
is made transparent and can be optimized with selective measures. The long-term
monitoring of machine signals and presentation in the form of trend curves permits
the clear identification of trending and the continuous improvement of production.
Maintenance personnel can also use these long-term measurements for timely predictive
maintenance work, thereby eliminating expensive non-production times.
Permanent analysis of process operations in this way permits the identification
of weaknesses in production and the achievement of major increases in machine
Thanks to the standardized control system interface (OPC) and data storage
system (MSDE/SQL) this solution is suitable for universal use that is independent
of the machine. With virtually unlimited scalability, it is possible for data
to be acquired and presented - from a single machine to an entire production
system. The web-based user interface offers optimized screens that display analysis
graphics on any computer in the machinery network. Online diagnostic functions
and clear configuration menus provide support for the installer when setting
up the networked system and therefore offer a high level of operating convenience
- not only for analysis, but from the very beginning of commissioning.
WebMIS was developed on the basis of international standards and is therefore
capable of straightforward integration in all machine networks (Ethernet TCP/IP).
Data is acquired on the machines at all times - even in the case of network
failure, thanks to a buffer on the local controller computer.
View the WebMIS brochure (161 KB)
New high-performance industrial PCs from Rexroth
- IndraControl VPP series
VPP series terminals integrate the industrial computer, operator panel and visual
display into a single, compact unit. Specifically designed for rugged industrial
applications, they offer long-lasting, trouble free operation. Built-in UPS
system, shock-mounted hard disk, and imaging software reduces the risk of data
loss to a minimum.
Integrated UPS logic
The integrated UPS logic ensures that production continues
uninterrupted. In addition to analyzing the remaining voltage in the rechargeable
batteries, it also analyses the processor temperature and monitors the speed
of the fan, the voltage, and much more.
Rugged and reliable
We chose highly reliable internal components. As an example, the devices have
been specially designed to ensure that the hard disk is resistant to shocks
of up to 15 g and vibrations of up to 1 g.
Additional features include:
Keyed or touchscreen versions available
12" and 15" TFT color displays with graphics capability
Capable of flexible extension
Optimum platform for Rexroth's system solutions
View the IndraControl VPP in the Product Catalog
IndraWorks - Rexroth's universal software platform
for all engineering tasks
IndraWorks is the universal software for programming, start-up, operation, visualization,
and troubleshooting - from the HMI to the drives.
You can now take advantage of open standards and integrated software modules
to perform all of your engineering tasks with a single, full-featured software
solution that is efficient and intuitive. The new IndraWorks engineering framework,
based on .NET technology, combines all the tools you need for the design phase,
parameter setting, diagnostics and initial startup in a single user interface.
The entire language set, as defined in IEC 61131-3, is available on all platforms
in a unified programming environment. The open motion interface allows for transparent
integration of drive functions including PLCopen-compliant modules.
In addition, you can use wizards to set parameters in ready-to-use technology
functions or integrate them as modules into your PLC programs. Rexroth is a
certified Microsoft partner and member of the Microsoft Developers Network.
As a result, IndraMotion and IndraWorks are a secure investment into the future
and in innovative solutions.
more information on IndraWorks in the IndraMotion brochure (PDF, 450 KB)
Version 23VRS software for SYSTEM 200 platform
continues to build on this open architecture technology with the MTC 200 and
digital intelligent SERCOS drives. These technologies significantly increase
the workpiece quality and maximize productivity. The future-oriented concept
with open control architecture offers you all the advantages of PC technology.
However, the MTC 200 was specifically designed for reliable operation of today’s
advanced production machines.
The MTC 200 system combines the total functionality of a CNC and PLC control,
including the complete drive technology. In this combination you receive an
optimized scalable system solution, whether you want to control a compact stand-alone
machine or a complex production system.
With MTC 200 performance, you improve productivity with clearly shorter cycle
times and reduce fault recovery and downtime by using very powerful ProVi contact
level diagnostics. The MTC 200 was specifically designed for applications including
transfer machines, inter-linked production machines and cell systems, machining
centers, lathes and turning centers, drilling systems, and integrated automation
the MTC 200 brochure (1 MB)
IndraDrive - Rexroth's latest generation of digital
intelligent drives with integrated PLC
its modular, scalable design, drive-integrated PLC and built-in safety functionality,
the IndraDrive M is a complete, intelligent solution to food and packaging automation
tasks. The new Rexroth IndraDrive M digital drive system provides greater precision,
higher productivity and better performance than previous drive-system models.
Scalable Functionality - IndraDrive M incorporates Rexroth servo-drive
and frequency-converter technology into one platform. With an optional drive-integrated,
IEC61131-3-compliant PLC onboard, plus built-in safety technology and motion
function-block programming, the IndraDrive M eliminates the need for a traditional
PLC on small machines. The integrated PLC also provides programming and parameterization
through a single interface. The IndraDrive M supports all standard communication
protocols, including SERCOS, PROFIBUS, CANopen, DeviceNet and INTERBUS, as well
as analog and parallel interfaces. In addition, the drive units can be equipped
with additional encoder interfaces, industry-specific technology functions and
Scalable Power - IndraDrive M's modular platform offers cost-effective
scalability in terms of power. The drives units, available as servo or vector,
cover the entire output spectrum -- from 1.5 to 120 kW. The power supply units
are available as either regenerative or non-regenerative units. Both open- and
closed-loop servo versions are available on the same platform. This makes it
easy to use only one unique drive package with the same interfaces, power section
and start-up tool for food and packaging machines with different requirements.
Scalable Safety - IndraDrive M fulfills the industry's demand to implement
time-critical and safety-relevant functionality into the drive. The IndraDrive
M is available with integrated safety technology that complies with EN 954-1,
Category 3 -- a crucial new safety standard for European machines. This means
the IndraDrive M requires no additional hardware or indirect control solutions.
the IndraDrive in the Product Catalog
IndraDyn H - The latest generation of high-speed
their extremely wide constant-output-power (field-weakening) ranges, short ramp-up-to-speed
times and low rotor temperatures, these Rexroth motors are ideal for use in
main spindles and other high-speed applications.
IndraDyn H synchronous motors from Rexroth are kit motors which have been optimized
for high torque without compromising their high speeds. They consist of a three-phase-wound
stator and a permanent-magnet rotor. IndraDyn H motors offer a unique combination
of the advantages of synchronous motor technology with the operational characteristics
of asynchronous motors. With their extremely wide constant-output-power (field-weakening)
ranges, short ramp-up-to-speed times and low rotor temperatures, these motors
are ideal for use in main spindles and other high-speed applications. IndraDyn
H motors can provide up to 6,500 Nm of torque and can achieve speeds of up to
30,000 rpm. Acceleration times are up to 2.5 times faster than for comparable
The innovative cooling system, enclosed within the stator, reduces costs and
work for the machine builder while maximizing cooling efficiency. In addition,
the power and cooling connections are standardized for quick and easy connections.
IndraDyn H motors are designed for operation with bus voltages of up to 750
V. The motor windings are protected against thermal overload by integrated temperature
sensors. IndraDyn H motors, when used with Rexroth's new intelligent digital
drive family, IndraDrive, eliminate the need for external protection. Uncontrollable
costs associated with the failure of these control electronics are therefore
the IndraDyn H in the Product Catalog
IndraDyn T -
Frameless synchronous torque motors with rating up to 4,700 Nm
Direct electric drive technology brings peak power to the new Rexroth
IndraDyn T series of servo torque motors. IndraDyn T motors feature maximum
torque ratings up to 4,700 Nm, rated speeds from 25 to 700 rpm, maximum speeds
up to 1,200 rpm and extremely low torque ripple (<0.1%).
Rexroth IndraDyn T torque motors are synchronous frameless motors comprising
a stator with three-phase winding and a rotor with permanent magnets. These
direct drive motors eliminate wear-phone mechanical elements such as gears,
while significantly increasing accuracy and precision. The series offers new
solutions for robots and general automation.
The IndraDyn T torque motors are designed for link circuit voltages of up to
750 V and have liquid or convention cooling and include thermal encapsulation.
Integrated temperature sensors protect the motor windings against thermal overload.
the IndraDyn T in the Product Catalog
IndraDyn L -
Linear motors with ratings up to 22,000 Nm per motor
Rexroth's IndraDyn L series, a new generation of permanent-magnet linear
motors, revolutionizes linear drive systems with an innovative motor concept.
For the first time, the main requirements for linear motors have been combined
in a single motor concept, resulting in considerable advantages for the user
and expanding the use of economic linear motors in a wide range of applications.
Prominent features of the IndraDyn L motors include a high degree of both continuous
and maximum output, compact design and very low force ripple.
The motors are available in various sizes and overall lengths with optional
standard encapsulation or thermo-encapsulation for higher thermal stability
requirements. All components provide IP65 protection, ensuring high operational
reliability even under harsh ambient conditions. When combined with Rexroth
controls and drives, this drive solution sets another innovative milestone on
the path of direct drive developments.
the IndraDyn L in the Product Catalog